-
Features： 1. Two sets of customer-defined programs P1/P2 are easy to call and save time; 2. Speed range: 300-5000rpm, step 10rpm; maximum relative centrifugal force: 2600×g, step 10×g, speed centrifugal force switching display; 3. Rotor capacity: 6×15ml/10ml/7ml/1.5-5ml; 4. Equipped with electronic door locks, LCD displays speed, timing time, and door lock status; 5. Safety performance: overspeed protection, status diagnosis system; 6. Low noise <56dB (A): The high-strength plastic fully enclosed rotor rotor can effectively prevent the sample from rubbing between the test tube and the air in the center, causing heat that affects the experimental effect; 7. After centrifugation is completed, a sound prompts and the lid is automatically opened to facilitate the cooling of the sample. -
The direct-heating tri-gas incubator is a biochemical experimental instrument used for cell and tissue culture as well as bacterial culture. It is an essential product for conduct cell and tissue culture as well as bacterial culture. It is an essential product for conducting research in immunology, genetics, and bioengineering. It is suitable for applications in life sciences, immunology, genetics, clinical medicine, agricultural science, pharmacology, the pharmaceutical industry, the food industry, toxi agricultural science, pharmacology, the pharmaceutical industry, the food industry, toxicology, basic biological research, and early clinical medical research. -
- Measures Gamma, Beta, and X-rays radiation. Detection range: 0.00~999μSv/h
- Real-time, Average, and Cumulative dose display; Alarm threshold display
- Alerts users via audio and visual alarms when the preset dose rate limit is exceeded. Alarm response time: 1 sec.
- Powered by two disposable/rechargeable AA batteries, or use the USB cable that came with the unit to power the device.
- Widely applied in environment evaluation, scientific testing on samples like: building material, hospital radiation therapy monitoring for cancer, food, water, indoor/outdoor-ray, and more
-
USES: Classrooms, office, gym, restaurants, home, and car. ACCURATE: Adapts advanced NDIR sensor technology with a 10-year life. BATTERY: Li-Ion battery-powered with USB recharge for up to 8 hours of cordless operation. Also powered with direct USB power. SIMPLE: Easy to use, not complex, basic, and accurate CO2 monitor. Desktop product. TRUSTWORTHY: ** 1-year limited warranty ** 100% quality guaranteed **
-
- Unlimited data logging and memories: Built-in 2GB memory card is used to permanently record the measurement data.
- View Trend Chart in GZAIR dashboard: Logged data can be output to computers for storing. Or upload the data file to the GZAIR website dashboard for analyzing.
- Accurate Measurement: Using NDIR CO2 Sensor technologies to detect CO2, Temperature, and Humidity. The date and Time are displayed on the big LCD simultaneously.
- Beeper and LED alarm: User-adjustable CO2 high/low alarm limit, if the CO2 value in the room exceeds the pre-set value, the instrument will respond with visual and audible warning tones.
- Human/Plant Mode: Human mode measures the carbon dioxide level in close space and reminds you to ventilate timely to get good air quality; Plant mode detects whether the plant is growing in a good condition.
- Offer two ways to calibrate the sensor: Manual Calibration and Automatic Calibration. Follow the steps in the Operating Instruction to perform the manual calibration. And it can automatically calibrate itself every two weeks during the detection.
- Complies with/CA AB 841
-
- Unlimited data logging and memories: Built-in 2GB memory card is used to permanently record the measurement data.
- View Trend Chart in GZAIR dashboard: Logged data can be output to computers for storing. Or upload the data file to the GZAIR website dashboard for analyzing.
- Accurate Measurement: Using NDIR CO2 Sensor technologies to detect CO2, Temperature, and Humidity. The date and Time are displayed on the big LCD simultaneously.
- Beeper and LED alarm: User-adjustable CO2 high/low alarm limit, if the CO2 value in the room exceeds the pre-set value, the instrument will respond with visual and audible warning tones.
- Human/Plant Mode: Human mode measures the carbon dioxide level in close space and reminds you to ventilate timely to get good air quality; Plant mode detects whether the plant is growing in a good condition.
- Offer two ways to calibrate the sensor: Manual Calibration and Automatic Calibration. Follow the steps in the Operating Instruction to perform the manual calibration. And it can automatically calibrate itself every two weeks during the detection.
- Complies with/CA AB 841
-
Unlimited data logging and memories: Built-in 2GB memory card is used to permanently record the measurement data. View Trend Chart in GZAIR dashboard: Logged data can be output to computers for storing. Or upload the data file to the GZAIR website dashboard for analyzing. Accurate Measurement: Using NDIR CO2 Sensor technologies to detect CO2, Temperature, and Humidity. The date and Time are displayed on the big LCD simultaneously. Beeper and LED alarm: User-adjustable CO2 high/low alarm limit, if the CO2 value in the room exceeds the pre-set value, the instrument will respond with visual and audible warning tones. Human/Plant Mode: Human mode measures the carbon dioxide level in close space and reminds you to ventilate timely to get good air quality; Plant mode detects whether the plant is growing in a good condition. Offer two ways to calibrate the sensor: Manual Calibration and Automatic Calibration. Follow the steps in the Operating Instructions to perform the manual calibration. And it can automatically calibrate itself every two weeks during the detection. The rechargeable battery can be fully charged in 2.5 hours and provide 8-10 hours duration. Complies with/CA AB 841 -
Indoor CO2 Meter, Temperature and Relative Humidity Wall Mountable Carbon Dioxide Detector, Air Quality Monitor, CO2 Monitor, NDIR Sensor, Time & Date, 0~5000ppm Range
- Accurate Detection: A High-Precision NDIR sensor is adopted in the detector. It works quickly, stably, and won't be affected by temperature or other conditions than outdated Chemosensor.
- Portable CO2 Meter: It is powered by a USB port or rechargeable battery. A fully charged battery will result in almost 10 hours of use. You can take it to wherever you want to monitor air quality.
- Tabletop or Wall Mount Use: Two use way, Wall-mounted or Tabletop design. You can set it on a stand or mount it on the wall with a mounting hole on the back.
- Two Detection Modes: Human and Plant. Human mode detects if you are in a healthy range. Plant mode detects whether the plant is growing in a good condition.
- Easy to Use: The simple interface makes it easy for users to monitor the carbon dioxide level.
- Complies with/CA AB 841
-
- Dual-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
- Fan Control: Programmable CO2 zone value & CO2 center value, Output power is on when the CO2 concentration is over Set Center + (1/2)Set Zone, and off when CO2 concentration is below Set Cente - (1/2)Set Zone.
- Remote CO2 sensor kit with 16' cable lets you monitor CO2 levels in confined space. (Note: Please power off the unit when you connect the ports of the sensor and controller)
- Wall Mountable CO2 Monitor and controller, comes with the piggyback socket for FAN controlling
- Wide HD screen to monitor CO2 levels, Time and date simultaneously, Touch button operation, Water-proof treatment to the CO2 controller body & the sensor probe
-
- Dual-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
- Programmable CO2 zone value & CO2 center value allows you to set desired CO2 level for different plants
- Remote CO2 sensor kit with photocell & 16' data cable lets you monitor CO2 levels from proper grow room locations. And the water-proof treatment sensor can work in a confined space.
- Auto Detect Day and Night Function. Start the CO2 generator or regulator by turning on output power when the photocell sensor detects light and the CO2 level is low. And shut off the CO2 generator by turning off the output power when it senses darkness.
- Wall Mountable CO2 Monitor & Controller, comes with the piggyback socket for CO2 generator or regulator
- Wide HD screen to monitor CO2 levels, Time & Date simultaneously, Touch button operation, Water-proof treatment to the CO2 controller body & the sensor probe (Note: Please power off the unit when you connect the ports of the sensor and controller)
-
- Dual-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
- Multiple Controller: external Sensor 5m / 15m cable control valve or fan, humidifier temperature controller
- Remote CO2 sensor kit with 16′ cable lets you monitor CO2 levels in confined space. (Note: Please power off the unit when you connect the ports of the sensor and controller)
- Wall Mountable CO2 Monitor and controller, comes with the piggyback sockets for controlling
- Wide HD screen to monitor CO2 levels, Time and date simultaneously, Touch button operation, Water-proof treatment to the CO2 controller body & the sensor probe
